FiiO K19 Flagship DAC Headphone AMP

FiiO K19 Flagship dac, headphone amp, 31 band parametric EQ. FiiO’s highest-end desktop amplifier, the K19 not only consolidates FiiO’s years of cutting-edge technological expertise but also introduces numerous top-notch configurations and new technologies for the first time. Moreover, it features a brand-new design with an ultra-thin integrated metal die-cast shockproof body.

Arguably some of the best available today, inside the K19 are two of the new ESS 8-channel ES9039SPRO DAC chips, featuring the fourth generation 32Bit HyperStream architecture and capable of ultra-high dynamic range with ultra-low noise. These DAC chips allow the K19 to output clearer and richer audio with plenty of detail. 

Other features support the DAC and allow the K19 to get the most from its many top quality components. Often found in much higher price equipment, parts and design features like two ACCUSILICON high performance ultra-low phase noise femtosecond crystal oscillators, HDMI/ARC decoding support, global clock management, fully balanced design, separated and shielded circuit boards, carefully designed power supply, audiophile-grade components all contribute to the K19's amazing capabilities.

FiiO K19 features a new headphone amplifier design consisting of an 8-channel THX AAA 788+ headphone amp architecture working together in parallel and backed by a high-voltage power supply. The THX amp chips are connected in parallel via 2×2 groups to make up a totally balanced, 4-channel amplification system.

The result is enhanced transients, and high-power output of up to 8000mW+8000mW with a 32Ω load – allowing the K19 to drive all kinds of headphones with ease.

Incredible EQ Capability!

FiiO K19 features DEL (Dual Engine Limiter) technology, and through proprietary algorithms, the K19 can apply various audio effects such as dynamic range compression (DRC) and dynamic range enhancement (DRE) as well as an advanced limiter to prevent clipping. Also on the K19 is an adjustable 31-band high-precision lossless PEQ*, which supports direct adjustment of PCM 44.1k~192k audio signals without resorting to sampling rate conversion (SRC).

For each band, the gain can be adjusted between a range of +12~-24dB and the Q value can be adjusted between a range of 0.4dB~128dB. And the PEQ curves don’t have to be used only by you – PEQ presets on the K19 can be shared between users. Being able to import and export PEQ presets opens up a whole new dimension to sound adjustment!

For the first time in an FiiO product, the K19 flagship desktop DAC and headphone amplifier utilizes an ADI ADSP-21565 DSP chip with the SHARC+ core backed by a custom ultra-low phase noise femtosecond crystal oscillator. This DSP chip featuring a high clock frequency of 800MHz and capable of 64-bit double precision floating point calculations is what makes the 31-band high-precision lossless PEQ possible in the K19.

The ADI DSP chip not only ensures that audio signals after PEQ adjustment are of high quality and with minimal distortion, it also helps to enable powerful system protection functions that safeguard both the K19 and the other devices and headphones connected to it

Under the new design, FiiO designers have customized an exclusive aluminum alloy base and a specially matched headphone stand for the K19. When placed vertically, it is stable, shockproof, convenient, and space-saving, while also enhancing heat dissipation.

When placed horizontally, the included foot pads can be used, and the screen can be adjusted to the corresponding angle to meet different usage needs.

Suggestion: The FiiO FT7 flagship headphone sounds fantastic with the K19! 

FiiO K19 Tech Specs: 

• DSP: ADI SHARC+ ADSP-21565
• DAC: DUAL 8-channel ES9039SPRO
• Headphone amplifier: 8-channel THX AAA 788+
• USB chip: XMOS XU316
• USB decoding support: 768kHz/32bit, DSD512, MQA
• USB interface: Type-C x3
• Bluetooth chip: QCC5125, BT 5.1
• Bluetooth codec: SBC/AAC/aptX/aptX LL/aptX HD/atpX Adaptive/LDAC
• Display: 1.30" (240*240) colour
• Power output 1: L+R≥2300mW+2300mW (32Ω SE, THD+N＜1%, Ultra high gain)
• Power output 2: L+R≥8000mW+8000mW (32Ω BAL, THD+N＜1%, Ultra high gain)
• Power output 3: L+R≥270mW+270mW (300Ω SE, THD+N＜1%, Ultra high gain)
• Power output 4: L+R≥1100mW+1100mW (300Ω BAL, THD+N＜1%, Ultra high gain)
• SNR: ≥128dB 
• Noise floor 1: LO＜1.6μV; PO＜3.5μV 
• Output impedance: ＜0.6Ω (32Ω)
• THD+N: ＜0.0002%(1kHz/-6dB@32Ω)
• Inputs: USB, Coax, Optical, HDMI ARC, BT
• Outputs: Coax, Optical, Line, Pre-Out
• Weight: 1.8 kg
• Dimensions: About 25 x 23 x 3.7 cm

Quick start guide, AC power cord, Type-C to USB-A adapter, 6.35mm adapter, stand, Vertical headphone stand support, Screwdriver, Metal XLR4 dust cover (pre-installed), Feet stands, Screws, USB2.0 data cable, Infrared remote control, 3.5mm audio cable, Type C-C data cable

Warranty: 1 Year by FiiO Canada